Contact lenses require the wearer to obtain a prescription outlining the type to purchase even if they are not meant for correction of vision. During physical examination of the eyes, the optician checks for astigmatism, hyper myopia, myopia and general eye health. Your visual strength will also be tested before prescription of Sacramento contact lenses.
In their insertion, the hands must be washed and dried thoroughly beforehand. The principal hand pointer finger is used to grasp the lens at the tip. The middle finger is utilized in pulling down the posterior eyelid.
The index finger of the other hand is used to elevate the eyelid at the top. While gazing upwards, the lens is placed on the white eye region and the lids released by removal of index fingers. Closing the eyes for a brief period allows lens to be positioned well inside the eye.
When taking them out, again you start with hand washing and drying them thereafter. While gazing upwards, the lower lid is pulled downwards using the dominant hand middle finger. The pointer finger is then used to slide out the lenses by squeezing it between the finger and the thumb. Given the delicate nature of the lens and the sensitivity of the eye, this should be carried out with a lot of caution.
The disposable ones are thrown away after a single use. Using them eliminates the need for constant cleaning and storage. However, these processes are not as hard as they are made to sound. As long as you follow the instructions given by the optician, everything will just go smoothly. There are specially made solutions for rinsing, disinfecting, protein removal and conditioning the lenses.
To avoid discomforts and maintain eye health during the use of these lens, there are some procedures to be done. The first one is cleaning the lenses and this should be done by putting a cleanser solution drop on each of the lenses side and rubbing gently for twenty second. This is followed by rinsing which should last for five seconds.
After the rinsing, they should be put inside a lens case and soaked using a cleansing solution for around 4 hours. The solution used for soaking should always be fresh and discarded immediately after use. After this, you can confidently put on lenses. If there is debris on the lenses surface, they can be done away with using a rinsing solution before being worn.
They should be put into a closed case meant for storing lenses if they are not in use. Saline solution should not be used for soaking them. Only the commercially made solutions designed for this purpose are to be used. The saline is not effective in disinfection process. They can remain in the case for up to thirty days if not in use. After this duration, they should be taken out for cleaning and disinfection even if they will not be used immediately. Another important thing you should observe is monthly replacement of the lens case.
In their insertion, the hands must be washed and dried thoroughly beforehand. The principal hand pointer finger is used to grasp the lens at the tip. The middle finger is utilized in pulling down the posterior eyelid.
The index finger of the other hand is used to elevate the eyelid at the top. While gazing upwards, the lens is placed on the white eye region and the lids released by removal of index fingers. Closing the eyes for a brief period allows lens to be positioned well inside the eye.
When taking them out, again you start with hand washing and drying them thereafter. While gazing upwards, the lower lid is pulled downwards using the dominant hand middle finger. The pointer finger is then used to slide out the lenses by squeezing it between the finger and the thumb. Given the delicate nature of the lens and the sensitivity of the eye, this should be carried out with a lot of caution.
The disposable ones are thrown away after a single use. Using them eliminates the need for constant cleaning and storage. However, these processes are not as hard as they are made to sound. As long as you follow the instructions given by the optician, everything will just go smoothly. There are specially made solutions for rinsing, disinfecting, protein removal and conditioning the lenses.
To avoid discomforts and maintain eye health during the use of these lens, there are some procedures to be done. The first one is cleaning the lenses and this should be done by putting a cleanser solution drop on each of the lenses side and rubbing gently for twenty second. This is followed by rinsing which should last for five seconds.
After the rinsing, they should be put inside a lens case and soaked using a cleansing solution for around 4 hours. The solution used for soaking should always be fresh and discarded immediately after use. After this, you can confidently put on lenses. If there is debris on the lenses surface, they can be done away with using a rinsing solution before being worn.
They should be put into a closed case meant for storing lenses if they are not in use. Saline solution should not be used for soaking them. Only the commercially made solutions designed for this purpose are to be used. The saline is not effective in disinfection process. They can remain in the case for up to thirty days if not in use. After this duration, they should be taken out for cleaning and disinfection even if they will not be used immediately. Another important thing you should observe is monthly replacement of the lens case.
About the Author:
Our website offers Sacramento contact lenses at cheaper prices. To choose us as your selected supplier, review our main homepage right here on http://adairoptometry.com.
No comments:
Post a Comment